Respirators
There are two types of hazards which require respiratory protection: oxygen deficiency
and contaminated atmospheres. Oxygen-deficient atmospheres have an oxygen concentration less than 19.5% and contaminated atmospheres contain toxic gases, vapors, fumes, particles, or mists at a harmful level. The most
common use of respiratory protection at Texas Christian University (TCU) involves
protection against airborne contaminants.
The TCU Respiratory Protection Program manual outlines the requirements and the University's
procedures for using respiratory protection in a safe and effective manner that is
in compliance with applicable regulations. This Program is managed by the Environmental
Health and Safety (EHS) office.
Resources & Forms
Respiratory Protection Program (work in progress)
OSHA Standard 29 CFR 1910.134 - Respiratory protection
OSHA Respiratory Protection eTool
Training
Training is required for all individuals who are required to wear respiratory protection
in the workplace or laboratory prior to initial use, and annually thereafter. The
training shall address the following elements:
- Why the respirator is necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator;
- The limitations and capabilities of the respirator;
- How to use the respirator effectively in emergency situations, including situations in which the respirator malfunctions;
- How to inspect, put on and remove, use, and check the seals of the respirator;
- The procedures for maintenance and storage of the respirator; and
- How to recognize medical signs and symptoms that may limit or prevent the effective use of respirators.
Retraining shall be administered annually when changes in the workplace or the type of respirator render previous training obsolete, if EHS determines there are inadequacies in the employee's knowledge or use of the respirator, or any other situation arises in which retraining appears necessary to ensure safe respirator use.
Assignment of online safety courses is overseen by EHS and accessible through the online HSI/SafetySkills Learning Management System. A TCU email address and ID is required for access. For information on training, please contact EHS at safety@tcu.edu or 817-257-7220.
Respiratory Protection - RSP-1.2
Learners who successfully complete this course will demonstrate knowledge of the basics
of respiratory protection, how to use it on the job, potential inhalation hazards,
fit testing, and respirator care & maintenance.